CLIFF™ Electronic Components USA

1U and 2U 19″ Panels for Rack Mounting

The 1U panels have 16 × 24mm holes to accept feedthrough and other XLR-format connectors with options of threaded M3x0.50 or #4-40 UNC mounting bushes. A connector labelling strip is located on the front and a cable strain-relief bar is fitted at the rear.

 

Applications include broadcast and AV patch panels, MIL, medical, control and instrumentation signal input/output panels etc. The 1U assemblies can be factory loaded with the specific connectors required by the system designer including BNC, single or dual USB or RJ45 with internal cable harnesses available as a special order. These pre-assembled panels simplify system assembly, reduce manufacturing time, component count and cost.

 

The feedthrough connector range allows designers to integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast, lighting, audio, and industrial applications. Versions of note include RJ45, HDMI, BNC and USB3.0 (single and dual). The existing range provides analogue, digital and optical feedthrough connectivity in formats including Firewire, HDMI A-to-A and 50 ohm BNC versions, USB2 A-to-B and B-to-A changer sockets and USB3 to USB3 in various configurations. Also available are popular data and ethernet connectors including LC and SC fibrefiber, (Duplex and Simplex), UTP and FTP RJ45s in both Cat6 and Cat5e, (shielded and unshielded), TOSLINK and RCA phono.phono/cinch. Functionality is affected by cable quality, length and cable wiring configuration.

 

Please see the PDF data sheets for technical specifications.

1U 19″ Panels (opens in a new window). 2U 19″ Panels (opens in a new window).

 

Please also see our feedthrough connectors, XLR audio and XLR format connectors and USB connectors.

 

 

 

• 

  1U panel suitable for XLR sized connectors.

  Rack mounting panel with 16 circular holes of 24mm diameter and various mounting options. Supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  • CP30150 1U panel with plain mounting holes.
  • CP30151 1U panel with M3 mounting holes.
  • CP30152 1U panel with #4-40 UNC mounting holes.

   

   

• 

  1U panel suitable for 16 SLIM and DualSLIM sized connectors.

  Rack mounting panel with 16 rectangular holes (17.3 × 22.86 mm) and various mounting options. 25.4 mm between holes. Supplied with a cable strain-relief bar. Black, powder-coated steel.

   

  • CP30158 1U SLIM × 16 panel with 16 plain 3.2 mm diameter mounting holes.
  • CP30159 1U SLIM × 16 panel with 16 M3 x 0.5 mounting holes.
  • CP30160 1U SLIM × 16 panel with 16 #4-40 UNC mounting holes.

   

   

• 

  1U panel suitable for 20 SLIM and DualSLIM sized connectors.

  Rack mounting panel with 20 rectangular holes (17.3 × 22.86 mm) and various mounting options. 20.8 mm between holes. Supplied with a cable strain-relief bar. Black, powder-coated steel.

   

  • CP30161 1U SLIM × 20 panel with plain 3.2 mm diameter mounting holes.
  • CP30162 1U SLIM × 20 panel with M3 x 0.5 mounting holes.
  • CP30163 1U SLIM × 20 panel with #4-40 UNC mounting holes.

   

   

• 

  2U panel suitable for XLR sized connectors.

  Rack mounting panel with 32 circular holes of 24mm diameter and various mounting options. Supplied with two cable strain-relief bars and two label strips. Steel with a black, powder coat finish.

   

  • CP30155 2U panel with plain 3.2 mm diameter mounting holes.
  • CP30156 2U panel with M3 x 0.5 mm threaded mounting holes.
  • CP30157 2U panel with #4-40 UNC threaded mounting holes.

   

   

 

Pre-assembled, Loaded Panels

 

• 

  1U panel loaded with 16 × 50Ω insulated BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30184 1U panel loaded with 16 × 50Ω insulated BNC connectors (CP30125). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × 75Ω insulated BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  • CP30170 1U panel loaded with 16 × 75Ω insulated BNC connectors (CP30126). M3 mounting holes. Front mounted.
  • CP30171 1U panel loaded with 16 × 75Ω insulated BNC connectors (CP30126). #4-40 UNC mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × 75Ω gold insulated BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30186 1U panel loaded with 16 × 75Ω 12GHz gold insulated BNC connectors (CP303112GMB). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × 50Ω narrow BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30188 1U panel loaded with 16 × SLIM, black, metal, 50Ω, BNC, feedthrough connectors (CP30637MB). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × 75Ω narrow BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30189 1U panel loaded with 16 × SLIM, black, metal, 75Ω, BNC, feedthrough connectors (CP30638MB). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 20 × 50Ω narrow BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30190 1U panel loaded with 20 × SLIM, black, metal, 50Ω, BNC, feedthrough connectors (CP30637MB). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 20 × 75Ω narrow BNC feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30191 1U panel loaded with 20 × SLIM, black, metal, 75Ω, BNC, feedthrough connectors (CP30638MB). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × CAT6 RJ45 feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  • CP30172 1U panel loaded with 16 × CAT6 RJ45 connectors. #4-40 UNC mounting holes. Front mounted.
  • CP30173 1U panel loaded with 16 × CAT6 RJ45 connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × CAT6a RJ45 feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30177 1U panel loaded with 16 × CAT6a RJ45 connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × HDMI A to HDMI A feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30174 1U panel loaded with 16 × HDMI A to HDMI A connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × USB2 A to USB2 B feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30175 1U panel loaded with 16 × USB2 A to USB2 B connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × USB2 B to USB2 A feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30176 1U panel loaded with 16 × USB2 B to USB2 A connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × ST / BFOC optical fibre fiber feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30178 1U panel loaded with 16 × ST optical fibre fiber connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × LC duplex SM optical fibre fiber feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30179 1U panel loaded with 16 × LC duplex SM optical fibre fiber connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × LC duplex MM optical fibre fiber feedthrough connectors.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30180 1U panel loaded with 16 × LC duplex MM optical fibre fiber connectors. M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × XLR 3DCM connectors.

  The connectors have solder tag connections rather than being feedthroughs.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30181 1U panel loaded with 16 × black, metal, XLR 3DCM connectors (FC61905). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 16 × XLR 3DCF connectors.

  The connectors have solder tag connections rather than being feedthroughs.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30182 1U panel loaded with 16 × black, metal, XLR 3DCF connectors (FC61900). M3 mounting holes. Front mounted.

   

   

• 

  1U panel loaded with 8 × XLR 3DCF and 8 × XLR 3DCM connectors.

  The connectors have solder tag connections rather than being feedthroughs.

  Rack mounting panel supplied with a cable strain-relief bar and paper identification strip. Black finish.

   

  CP30183 1U panel loaded with 8 × black, metal, XLR 3DCF (FC61900) and 8 × black, metal, XLR 3DCM (FC61905) connectors. M3 mounting holes. Front mounted.

   

   

 

 

Please contact Cliff™ sales for more information.

 

Our site uses PDF (portable document format) files to store information on our products. To view these files you should have a PDF reader installed. You can download Adobe Reader for free.