ITSA: Interconnect Technology Suppliers Association ISO 9001 Quality Management System certification

Electronic Components USA

quality components from design to manufacture

 

Press Release 23 June 2022

19″ Rack Mounting Panels in 16 or 20 hole variants

Pre-assembled or blank 1U × 19″ panels to suit XLR-format or CLIFF DualSLIM feedthrough connectors.

 

 

CLIFF Electronics, leaders in the design, development and manufacture of connectors and test equipment, can now offer panel builders and systems integrators three versions of the 1U high, 19″ rack panel for XLR-format and feedthrough connectors.

 

  • 16 standard, XLR-format holes, (24mm diameter panel cut-out).
  • 16 narrow, DualSLIM holes, (17.15 × 22.86 mm panel cut-out).
  • 20 narrow, DualSLIM holes, (17.15 × 22.86 mm panel cut-out).

 

CLIFF 19-inch Rack Mounting Panels

 

The flexibility allows system designers to use the best-fit connectors for their control systems and markets. The XLR version is fitted with a connector labelling strip on the front. All versions have a cable strain-relief bar fitted at the rear.

 

The Cliff series of true, feedthrough connectors are perfect for developing custom input/output configurations for wall-plates, rack panels, etc. They can be front or rear mounted and use standard cables for interconnecting – no soldering or push terminations required.

 

Cliff’s feedthrough connector range allows designers to integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast, lighting, audio and industrial applications. The range provides analogue, digital and optical feedthrough connectivity in formats including:

  • RJ45,
  • HDMI,
  • BNC,
  • USB (single and dual),
  • Firewire,
  • LC and SC fibre fiber (simplex and duplex),
  • TOSLINK EIAJ and
  • RCA phono / cinch.

 

The 1U panels can be factory loaded with the specific connectors required by the system designer. Internal cable harnesses are available as a special order. Pre-assembled panels simplify system assembly, reduce manufacturing time, component count and cost. Examples include:

  • 50Ω, 75Ω and 75Ω gold, insulated BNC,
  • Cat6 and Cat6A RJ45,
  • HDMI-A to HDMI-A,
  • USB2-A to USB2-B,
  • USB2-B to USB2-A,
  • ST / BFOC,
  • LC duplex (SM and MM) and
  • male and female, 3-pin, XLR audio sockets.

 

Simplify and speed-up assembly.

 

John Hall, Managing Director of CLIFF Electronics, comments, “Our rack-mounting panels simplify system assembly for our customers while our factory assembly service reduces their parts count and speeds up assembly times.”.

 

1U mounting rack panel with XLR sockets CP30183 1U panel loaded with 20 of 50-Ohm BNC feedthrough connectors

 

All versions of Cliff rack-mounting panels, feedthrough connectors and XLR-footprint connectors are in full production and available direct or via major international distributors.

 

 

Quality to rely on.

 

 

Cliff exhibiting

 

Underwriters Laboratories logo Canadian Standards Association logo Verband der Elektrotechnik logo British Electrotechnical Approvals Board logo Japan Electrical Appliance and Material Safety Law (DENAN) logo

 

Four decades of customer satisfaction.

 

About CLIFF Electronics.

Cliff Electronic Components Limited was founded in 1977 to supply the music industry with connectors. Cliff has subsequently greatly expanded its’ products and services to become a high quality supplier to most professional and industrial markets. As both a manufacturer and a distributor, the expansion of its’ product range has established Cliff as a prime source for components. As a UK manufacturer, Cliff is able to respond quickly to customer’s needs for both standard products and custom designs.

 

Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts, connection blocks, motors and assembly aids. It can also provide a wide range of leads including audio, instrument and power.

 

Cliff has extensive expertise in moulding molding and metalwork. It can provide a design, engineering and manufacturing service for the production of customised customized components and assemblies. Plastics expertise includes injection-moulding,injection-molding, blow-moulding,blow-molding, extrusion, sonic-welding and printing. Metalwork includes stamping, machining, aluminiumaluminum extrusion, finishing and printing.

 

Cliff has the facility to enable assembly, inspection and testing. Cliff’s UK and Far Eastern production plants are certified to ISO 9001 and employ design, engineering, technical, marketing and sales personnel. Quality has always been of prime importance and the majority of Cliff products are covered by approvals from organisations organizations such as UL and VDE.

 

For more information, please contact us.

 

CLIFF Electronics logo with PCB background

Cliff Electronic Components Ltd.
76 Holmethorpe Avenue,
Holmethorpe Industrial Estate,
REDHILL,
Surrey.
RH1 2PF
U.K.

Cliff Electronic Components Ltd.
10580 N McCarran Blvd,
Suite 115-587,
Reno,
NV 89503
U.S.A.

 

Telephone: +44 (0)1737 771375 +1 707 746 8090

Fax: +44 (0)1737 766012 +1 707 746 8092

Website: www.cliffuk.co.uk www.cliffusa.com

 

 

PR124  23 June 2022 | www.cliffuk.co.ukwww.cliffusa.com