ITSA: Interconnect Technology Suppliers Association ISO 9001 Quality Management System certification

Electronic Components USA

quality components from design to manufacture

 

Press Release 30 March 2020

White Feedthrough Connectors

Suitable for medical diagnostic and treatment equipment.

From CLIFF Electronics.

 

 

CLIFF Electronics, leaders in the design, development and manufacture of connectors and test equipment, have introduced two versions of their successful feedthrough connectors, aimed at manufacturers of medical, diagnostic and treatment equipment.

 

Typical applications include medical devices for diagnosis, prevention, monitoring, treatment or alleviation of disease, clinical and home monitoring products, dental and cosmetic electronic equipment, modems, routers, security and PoE systems.

 

White CLIFF feedthrough connectors

 

The new versions of the widely used USB2 A-A and CAT5e RJ45 data connectors are moulded molded from white nylon allowing designers to install them in equipment where the more commonly available black versions would be out of place and spoil the look of the end product. Cliff’s feedthrough connector design allows standard, off-the-shelf cables to be used for internal connectivity, simplifying assembly.

 

UTP Cat5e RJ45 feedthrough socket, white. CP30220

 

Cliff’s feedthrough connectors are designed to be mounted in the industry-standard, 24mm-diameter, XLR panel cut-out. With over 20 different connector types now available in this standard format, panel design and manufacture is greatly simplified.

 

The new white USB2 A-A and CAT5e RJ45 connectors are available with plain or countersunk mounting holes to facilitate assembly on the front or rear of control panels.

 

The wide range of feedthrough connectors now available from Cliff allows designers to integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast (studio and mobile), lighting, audio, medical, PoE and industrial applications, instrumentation and control connectivity.

 

The most popular connectors in Cliff’s feedthrough range are CAT5e RJ45, CAT5e shielded RJ45, CAT6 RJ45, CAT6 shielded RJ45, HDMI female-to-female, USB 3.0 A-to-A, USB 2.0 B-to-A and USB 2.0 A-to-A. All widely used in data and audio-visual applications.

 

A range of dust covers are now available to protect unused connectors from the ingress of dirt and fluff. Push-in types, with lanyards, in black or white, may be used with RJ45, USB-A, USB-B, USB-C, and USB3-B sockets. Gasket style versions in red, black and blue are suitable for the rest of the connector range.

 

More complex connectivity for IoT and cloud computing.

 

“There is rapid growth in new technology for medical diagnostic and treatment devices and cosmetic surgery. IT and PoE systems continue to become more sophisticated and require more complex connectivity for the IoT and cloud computing. The majority of these devices are packaged to fit into workplace or home environments where traditional, industrial-style connectors would look out of place and reduce the perceived quality and appropriateness of the product.” says John Hall, managing director of CLIFF Electronics. “Our flexible UK design and manufacturing means we can respond to changes in our customer’s requirements and new markets quickly and cost effectively.”

 

USB 2.0 A female to USB 2.0 A female feedthrough socket, white

 

The complete range of Cliff standard and feedthrough connectors are in full production and available direct or via major international distributors.

 

 

Quality to rely on.

 

 

Cliff exhibiting

 

Underwriters Laboratories logo Canadian Standards Association logo Verband der Elektrotechnik logo British Electrotechnical Approvals Board logo Japan Electrical Appliance and Material Safety Law (DENAN) logo

 

Four decades of customer satisfaction.

 

About CLIFF Electronics.

Cliff Electronic Components Limited was founded in 1977 to supply the music industry with connectors. Cliff has subsequently greatly expanded its’ products and services to become a high quality supplier to most professional and industrial markets. As both a manufacturer and a distributor, the expansion of its’ product range has established Cliff as a prime source for components. As a UK manufacturer, Cliff is able to respond quickly to customer’s needs for both standard products and custom designs.

 

Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts, connection blocks, motors, fans and assembly aids. It can also provide a wide range of leads including audio, instrument and power.

 

Cliff has extensive expertise in moulding molding and metalwork. It can provide a design, engineering and manufacturing service for the production of customised customized components and assemblies. Plastics expertise includes injection-moulding,injection-molding, blow-moulding,blow-molding, extrusion, sonic-welding and printing. Metalwork includes stamping, machining, aluminiumaluminum extrusion, finishing and printing.

 

Cliff has the facility to enable assembly, inspection and testing. Cliff’s UK and Far Eastern production plants are certified to ISO 9001 and employ design, engineering, technical, marketing and sales personnel. Quality has always been of prime importance and the majority of Cliff products are covered by approvals from organisations organizations such as UL and VDE.

 

For more information, please contact us.

 

CLIFF Electronics logo with PCB background

Cliff Electronic Components Ltd.
76 Holmethorpe Avenue,
Holmethorpe Industrial Estate,
REDHILL,
Surrey.
RH1 2PF
U.K.

Cliff Electronic Components Ltd.
10580 N McCarran Blvd,
Suite 115-587,
Reno,
NV 89503
U.S.A.

 

Telephone: +44 (0)1737 771375 +1 707 746 8090

Fax: +44 (0)1737 766012 +1 707 746 8092

Website: www.cliffuk.co.uk www.cliffusa.com

 

 

PR087  30 March 2020 | www.cliffuk.co.ukwww.cliffusa.com