ITSA: Interconnect Technology Suppliers Association ISO 9001 Quality Management System certification

Electronic Components USA

quality components from design to manufacture

 

Press Release 01 October 2019

New USB-C Feedthrough Connectors

Reversible female-to-female connectors fit standard XLR cut-out

from CLIFF Electronics.

 

 

CLIFF Electronics announces the addition of a feedthrough version of the industry-standard USB-C connector which can carry data and power on a single cable. The Cliff USB-C connector has no up or down orientation and the connector cannot be mis-inserted.

 

CLIFF USB-C feedthrough connector

 

The right way is always up.

 

Able to connect to, and power devices including a native DisplayPort, MHL, or HDMI device, the 24-pin USB connector standard has a double-sided, rotationally-symmetrical design. Connection to both sides of the connector is made using off-the-shelf, standard USB-C male leads.

 

In common with the rest of Cliff’s extensive range of feedthrough connectors the new USB-C version may be mounted into an industry-standard XLR-panel, cut-out, simplifying system design and improving product aesthetics. esthetics. The USB-C connector may also be fitted to CLIFF’s purpose built 19″ rack panels, providing systems integrators with fast and convenient system assembly.

 

Cliff’s XLR-format connectors take advantage of the standard 24mm panel cut-out widely used in audio and broadcast systems. This is increasingly popular in instrumentation, medical and industrial applications due to the format’s flexibility, security and reliability. The new Cliff USB-C connecter may be mounted to the front or rear of control panels and supplied with plain or countersunk mounting holes.

 

Dan Walker, General Sales Manager of CLIFF Electronics, comments, “USB-C has been widely adopted as the standard connector for supplying data and power between devices and systems. With our new feedthrough version, all users have to do is line up the connector properly to make the connection. It never needs to be rotated for correct operation as the right way is always up.”.

 

Cliff’s feedthrough connectors now provide analogue, digital and optical connectivity in formats including VGA, mini DisplayPort, Firewire, RJ45, HDMI, BNC and USB3.0 compliant single and dual versions. Also available are all popular data and ethernet connectors including USB2 A-to-B and B-to-A changer sockets, high speed USB type-C, LC and SC fibre,fiber, (Duplex and Simplex), UTP and FTP RJ45s in both Cat6 and Cat5e, (shielded and unshielded), TOSLINK and RCA phono.phono/cinch.

 

USB type C feedthrough CP30201

 

All versions of Cliff XLR-footprint connectors are in full production and available direct or via major worldwide distributors.

 

 

A go-to supplier for industry.

 

 

Cliff exhibiting

 

Underwriters Laboratories logo Canadian Standards Association logo Verband der Elektrotechnik logo British Electrotechnical Approvals Board logo Japan Electrical Appliance and Material Safety Law (DENAN) logo

 

Industrial connectors and assembly aids.

 

About CLIFF Electronics.

Cliff Electronic Components Limited was founded in 1977 to supply the music industry with connectors. Cliff has subsequently greatly expanded its’ products and services to become a high quality supplier to most professional and industrial markets. As both a manufacturer and a distributor, the expansion of its’ product range has established Cliff as a prime source for components. As a UK manufacturer, Cliff is able to respond quickly to customer’s needs for both standard products and custom designs.

 

Cliff manufactures audio, optical and power connectors and accessories, general industrial connectors, foot pedals, lighting connectors, terminal posts, connection blocks, motors, fans and assembly aids. It can also provide a wide range of leads including audio, instrument and power.

 

Cliff has extensive expertise in moulding molding and metalwork. It can provide a design, engineering and manufacturing service for the production of customised customized components and assemblies. Plastics expertise includes injection-moulding,injection-molding, blow-moulding,blow-molding, extrusion, sonic-welding and printing. Metalwork includes stamping, machining, aluminiumaluminum extrusion, finishing and printing.

 

Cliff has the facility to enable assembly, inspection and testing. Cliff’s UK and Far Eastern production plants are certified to ISO 9001 and employ design, engineering, technical, marketing and sales personnel. Quality has always been of prime importance and the majority of Cliff products are covered by approvals from organisations organizations such as UL and VDE.

 

CLIFF blue honeycomb logo

For more information, please contact us.

 

Cliff Electronic Components Ltd.
76 Holmethorpe Avenue,
Holmethorpe Industrial Estate,
REDHILL,
Surrey.
RH1 2PF
U.K.

Cliff Electronic Components Ltd.
10580 N McCarran Blvd,
Suite 115-587,
Reno,
NV 89503
U.S.A.

 

Telephone: +44 (0)1737 771375 +1 707 746 8090

Fax: +44 (0)1737 766012 +1 707 746 8092

Website: www.cliffuk.co.uk www.cliffusa.com

 

 

 

PR081  01 October 2019 | www.cliffuk.co.ukwww.cliffusa.com